MTD 27-Ton Manual de servicio descargar pdf (Pagina 9)

Engine and pump

MTD log splitters are available with a variety of horizontal and vertical shaft engines. This manual covers proce-

dures that are the same for all engine models available. Specific engine procedures are covered in the engine’s ser-

vice manual.

Horizontal shaft engines

To remove/replace the engine:

1. Remove the three coupling support bracket nuts

using a pair of 1/2” wrenches.

See Figure 2.1.

NOTE: A thin headed wrench (like a tappet wrench) is

needed to fit between the engine and the coupling

support bracket.

2. Slide the pump and the coupling support bracket off

as one assembly.

NOTE: support the pump. DO NOT let the pump hang by

the hoses.

3. Remove the spider from the engine coupling.

4. Remove the spacer shield.

5. Remove the four engine mounting screws using a 9/

16” wrench.

6. Remove the engine from the log splitter.

Figure 2.1

Nuts

coupling support bracket

Spacer shield

Thin headed

wrench

Figure 2.2

Engine mounting

screws

CHAPTER 2: ENGINE AND PUMP

For Parts Call 606-678-9623 or 606-561-4983

www.mymowerparts.com

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 71 72

Sin comentarios

MTD 27-Ton Manual de servicio Pagina 9