MTD 27-Ton Manual de servicio descargar pdf (Pagina 36)

2010 Log Splitters

6. Disconnect the high pressure hose from the pump.

7. Disconnect the high pressure supply hose from the

valve using a 15/16” wrench.

See Figure 4.3.

8. Disconnect the high pressure hose that connects

the valve to the base of the cylinder.

9. Remove the return hose fitting:

9a. Hold the fitting with a 1” wrench.

See Figure 4.4.

9b. Back off the jam nut with a 1” wrench.

9c. Remove the fitting.

10. Remove the two screws that hold the valve to the

mounting bracket using a 9/16” wrench.

See Figure 4.5.

11. Remove the two screws that hold the mounting

bracket to the cylinder using a 1/2” wrench.

See Figure 4.5.

Figure 4.3

Control valve

high pressure

supply hose

Hose to the

cylinder

Figure 4.4

Jam nut

Return hose fitting

Figure 4.5

Mounting bracket

For Parts Call 606-678-9623 or 606-561-4983

www.mymowerparts.com

1 2 ... 31 32 33 34 35 36 37 38 39 40 41 ... 71 72

Sin comentarios

MTD 27-Ton Manual de servicio Pagina 36