MTD 248-604A Manual de instalación descargar pdf (Pagina 5)

IM 1083 Self-Contained WSHP Unit Ventilator Models ARQ, ERQ, GRQ Page 5 of 42

Make sure lifting equipment can handle the weight of the unit

safely. Personal injury may result if improper lifting and moving

methods are used. (See table 2 for approximate shipping weights)

Use 72" length forklift tines, short tines will damage the unit

bottom. Improper handling can damage internal components.

Do not stand the unit on end or stack (see gure 2 & 3)

Models ARQ, ERQ, GRQ Self-

Contained Floor Unit Ventilator

Installation

Receiving & Handling

This product was carefully packed and thoroughly inspected

before leaving the factory. Responsibility for its safe delivery was

assumed by the carrier upon acceptance of the shipment. Claims

for loss or damage sustained in transit must therefore be made

upon the carrier, as follows:

Visible Loss or Damage

Any external evidence of loss or damage must be noted on the

freight bill or carrier’s receipt, and signed by the carrier’s agent.

Failure to adequately describe such external evidence of loss or

damage may result in the carrier’s refusing to honor a damage

claim. The form required to le such a claim will be supplied by the

carrier.

Concealed Loss or Damage

Concealed loss or damage means loss or damage which does not

become apparent until the product has been unpacked. The

contents may be damaged in transit due to rough handling even

though the carton may not show external damages. When the

damage is discovered upon unpacking, make a written request for

inspection by the carrier’s agent within fteen (15) days of the

delivery date. File a claim with the carrier since such damage is the

carrier’s responsibility.

Storage

If equipment is stored for any length of time before installation, it should

remain in its shipping packaging in a clean, dry, climate controlled area.

Figure 1: Data Plate Location

Figure 2: Stack Units Maximum 2 High as Shown

2 high

Correct

Incorrect

Figure 3: Forklift Lifting Requirements

Lifting Points

WARNING

CAUTION

Models ARQ, ERQ, GRQ 024 040 048

Nominal Airow – CFM (L/S) 1000 (472) 1250 (590) 1500 (708)

Room

No. of Fans 3 4 4

Fan Data

Dia. – In. (MM) 8.12

(206) 8.12

(206)

8.12

(206)

Width - In. (MM) 8.25 (210) 8.25 (210) 8.25 (210)

Room Fan Motor Horse Power 1/4

1/4

Nom. Size – In. (MM) 10 × 48½ × 1 (254 × 1232 × 25) 10 x 60½

× 1 (254 × 1537 × 25) 10 × 36½ × 1 (254 × 927 × 25)

Filter Data Area – FT

) 3.37 (0.31) 4.20 (0.39) 5.08 (0.47)

Quantity 1 1 2

Approx. Ship Weight – Lbs. (KG) 690 (310) 720 (325) 760 (340)

Refrigerant Charge – Oz. 84 130 100

Table 2: General Unit Data

Lifting Unit

A forklift or other lifting device is needed to install this product.

Unit Overall Dimensions (without end panels)

024 = 86"w × 30"h × 16⅝"d or (21⅞"d w/Adapter Back)

040 = 98"w × 30"h × 16⅝"d or (21⅞"d w/Adapter Back)

048 = 110"w × 30"h × 16⅝"d or (21⅞"d w/Adapter Back)

1 2 3 4 5 6 7 8 9 10 ... 41 42

Comentarios a estos manuales

Sin comentarios

MTD 248-604A Manual de instalación Pagina 5

Comentarios a estos manuales

Relacionado con productos y manuales para Cortadoras De Troncos MTD 248-604A