Mtd CSV 070 Manual de usuario descargar pdf (Pagina 10)

Self-propelled Chipper Shredder Vacuum

3.7. Safely support rear of the unit so that the rear

wheels are off the ground, and remove rear hub

caps. See Figure 3.7.

3.8. Using a 1/2” wrench and a 9/16” wrench remove

the shoulder bolts, washers, and rear wheels.

See Figure 3.8.

NOTE: A heavy washer goes between wheel

and outside of frame.

3.9. Cross-bar is also secured by the rear wheel

shoulder bolts. It can be removed as the rear

wheels are removed.

NOTE: The rear cross bar is shorter than the

front cross bar.

3.10. Remove retaining ring holding drive gear and

dowel pin on axle. See Figure 3.10.

NOTE: There are right hand and left hand drive

gears

3.11. Remove dust cover

NOTE: Rim on dust cover faces outboard

3.12. Remove E-clip and flat washer from axle.

See Figure 3.12.

Figure 3.7

4X4 supports

Figure 3.8

Heavy washer

Dust cover

Figure 3.10

Right hand drive gear

Dust cover

Figure 3.12

E-clip

Flat washer

Bushing

1 2 ... 5 6 7 8 9 10 11 12 13 14 15

Sin comentarios

Mtd CSV 070 Manual de usuario Pagina 10