MTD CSV 020 Especificaciones descargar pdf (Pagina 10)

ControlsandFeatures

Recoil

Bag

Chip|

Nozzle Height

Adjustment Lever

Figure 44

WARNING: The operation of any chipper shredder

can result in foreign objects being thrown into the

eyes, which can damage your eyes severely. Always

wear the safety glasses provided with this unit or

eye shields while operating or while performing any

adjustments or repairs.

ChipperChute

Allows twigs and small branches up to 1-1/2" in diameter to be

fed into the impeller for chipping. See Fig. 4-1.

NozzleHeightAdjustmentLever

Used to adjust the nozzle ground clearance ranging

approximately 5/8" to 4 1/8".

Nozzle

Yard waste such as leaves or pine needles can be vacuumed up

through the nozzle for shredding.

Bag

Collects shredded material fed through the chipper chute or

vacuumed through the nozzle.

RecoilStarter

The recoil starter is attached to the right upper handle. Stand

behind unit and pull the recoil starter to start engine.

EngineControls

See the separate engine manual for the location and function of

the controls on the engine.

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 19 20

Sin comentarios

MTD CSV 020 Especificaciones Pagina 10