MTD 24632B Manual de usuario descargar pdf (Pagina 16)

Spectrum Master™ MS2723C General Specifications

MS2723C TDS PN: 11410-00524 Rev. J 15

General Specifications

All specifications and characteristics apply under the following conditions, unless otherwise stated: 1) After

5 minutes of warm-up time, where the instrument is left in the ON state; 2) Apply when using internal

reference and performance sweep mode; 3) Subject to change without notice; 4) Typical performance is

the measured performance of an average unit; 5) Recommended calibration cycle is 12 months.

Setup Parameters

System

Status (Temperature, Battery Info, S/N, Firmware Ver, IP Address, Options Installed)

Self Test, Application Self Test

GPS (see Option 31)

System Options

Name, Date and Time, Ethernet Configuration, Display, Volume

Display (Brightness, Default Colors, Black and White, Night Vision, High Contrast)

Language (English, French, German, Spanish, Chinese, Japanese, Korean, Italian, Russian, User defined)

Share Center Frequency and Power Offset between Modes

Reset (Factory Defaults, Master Reset, Update Firmware)

File

Save, Recall, Delete, Directory Management

Save/Recall

Setups, Measurements, Screen Shots JPEG (save only)

Delete

Selected File, All Measurements, All Mode Files, All Content

Directory Management

Sort Method (Name/Type/Date), Ascend/Descend, Internal/USB, Copy, Format USB

Internal Trace/Setup Memory

>13,000traces

External Trace/Setup Memory

Limited by size of USB Flash drive

Mode Switching

Auto-Stores/Recalls most recently used Setup Parameters in the Mode

Connectors

RF In

Type N, female, 50 Ω, Maximum Input +30 dBm, ±50 VDC

GPS

SMA female

External Power

5.5 mm barrel connector, 12 to 15 VDC, < 5.0 Amps

LAN Connection

RJ48C, 10/100 Mbps, Connect to PC or LAN for Remote Access

USB Interface (2)

Type A, Connect Flash Drive and Power Sensor

USB Interface

5-pin mini-B, Connect to PC for data transfer

Headset Jack

2.5 mm 3-wire headset jack

External Reference In

BNC, female, 50 Ω, Maximum Input –10 dBm to +10 dBm

External Reference Out

BNC, female, 50 Ω, 10 MHz

External Trigger

BNC, female, 50 Ω, Maximum Input ±5 VDC

IF Out

BNC, female, 50 Ω, 140 MHz

Display

Size

8.4 in

Resolution

800 x 600

Battery

Typ e

Li-Ion

Battery Operation

3hours, typical

Electromagnetic Compatibility

European Union

CE Mark, EMC Directive 89/336/EEC, 92/31/EEC, 93/68/EEC and

Low Voltage Directive 73/23/EEC, 93/68/EEC

Australia and New Zealand

C-tick N274

Interference

EN 61326-1

Emissions

EN 55011

Immunity

EN 61000-4-2/-3/-4/-5/-6/-11

Safety

Safety Class

EN 61010-1 Class 1

Product Safety

IEC 60950-1 when used with company-supplied Power Supply

Environmental

Operating Temperature

–10 °C to 55 °C

Maximum Humidity

85 %

Shock

MIL-PRF-28800F Class 2

Storage

–51 °C to 71 °C

Altitude

4600 meters, operating and non-operating

Size and Weight

Size

315 mm x 211 mm x 77 mm, (12.4 in x 8.3 in x 3.0 in)

Weight

3.5 kg, (7.8 lb)

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 24 25

Comentarios a estos manuales

Sin comentarios

MTD 24632B Manual de usuario Pagina 16

Comentarios a estos manuales

Relacionado con productos y manuales para Cortadoras De Troncos MTD 24632B