MTD TBBC Manual del operador descargar pdf (Pagina 10)

OPERATING THE EZ-LINK TM SYSTEM

The EZ-Link TM system enables the use of these optional

Add-Ons.

Cultivator ................................ TBGC

Edger ................................... TBLE

Hedge Trimmer ........................... TBAH

Straight Shaft Trimmer ...................... TBSS

Turbo Blower ............................. TBTB

Pole Saw ................................ TBPS

Brushcutter .............................. TBBC*

*Do NOT use this attachment with an electric

powered product.

WARNING: Before you begin

using any

attachment, read and understand the manual

that came with the attachment. Follow all

safety information contained within.

Removing the Cutting Attachment or Add-Ons

1. Turn the knob counterclockwise to loosen (Fig. 9).

2. Press and hold the release button (Fig. 9).

3. While firmly holding the upper shaft housing, pull

the cutting attachment or add-on straight out of the

EZ-Link TM coupler (Fig. 10).

WARNING: Toavoidserious

personal injury and

damage to the unit, shut the unit off before

removing or installing add-ons.

Installing the Cutting Attachment or Add-Ons

NOTE: To make installing or removing the add-on

easier, place the unit on the ground or on a work

bench.

1. Turn knob counterclockwise to loosen (Fig. 9).

EZ-LinkTM Coupler Release Button

Guide Recess

Fig. 9

2. While firmly holding the add-on, push it straight into

the EZ-Link TM coupler (Fig. 10).

NOTE: Aligning the release button with the guide recess

will help installation (Fig. 9).

Release Button

EZ-Link TM Coupler

Primary Hole

Upper Shaft Housing Lower Shaft Housing

Fig. 10

3. Turn the knob clockwise to tighten (Fig. 11).

CAUTION: Locktherelease

button in the primary

hole (Fig. 10) and securely tighten the knob

before operating this unit.

90° Edge

Trimming Hole

Fig. 11

CAUTION: The add-ons with the

coupler system is to

be used in the primary hole only. Using the

wrong hole could lead to personal injury or

damage to the unit.

For decorative trimming/edging with the line head cutting

attachment, lock the release button of the cutting

attachment into the 90° hole (Fig. 11).

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 21 22

Comentarios a estos manuales

Sin comentarios

MTD TBBC Manual del operador Pagina 10

Comentarios a estos manuales

Relacionado con productos y manuales para Cortadoras De Césped MTD TBBC