Mtd 24642-A Manual de usuario

.75OWNER’SMANUAL5 and 8 H.P. LOG SPLITTERSModel Numbers242-642A242-645A24642-A24645-Aimportant:Read Safety Rules and Instructions CarefullyThank you f

Models 642 and 645NOTEThis instruction manual covers various models, and all specifications shown do not necessarily apply to your model. Specificatio

Models 642 and 645PARTS LIST FOR LOG SPLITTER MODELS 642 and 645.vO.PartNo.ColorCodeDESCRIPTIONNewPartRef.No.PartNo.ColorCodeDESCRIPTIONNewPart1717-04

Models 642 and 6451&2PUSH PLATE WELDED TO CYLINDER ROD4&51^4*5U2PUSH PLATE REMOVABLE3-1/2" DIA. CYLINDER PARTS LIST FOR MODEL 6424&quo

INDEXSafe Operation Practices...3Assembly Instructions ...

IMPORTANTIt is suggestsd that this manual be read in its entirety before attempting to assemble or operate Keep ^ this manual in a safe place for futu

-ii-F-GC-D-FIGURE 1ASSEMBLY INSTRUCTIONSTOOLS REQUIRED:(1) Raw Hide or Plastic Hammer (1) 1-1/8" Wrench or Adjustable Wrench (1) 3/4" Wrench

HAI'/iMERFIGURE 4ENGAGEMENT HANDLEENGAGEMENT RODHAIR PIN COTTER FERRULE4. Place hub cap (E) in position on wheel and tap on with a plastic hamme

3. Fill reservoir tank on log splitter. Remove the the breather plug from breather tube. See figure 7. Pour approximately 3 gallons

Maximum length that can be split is 24".1. Set throttle at maximum speed.2. Place log on beam and hold in place with right hand. See f

ADJUSTMENTS1. Block up front of log splitter so beam is level.CARBURETOR ADJUSTMENTSRefer to engine manual packed with your unit forcarburetor adjust

INLET HOSEHOSE CLAMPSTRAINER TUBE ASSEMBLYFIGURE 16STRAINER TUBE ASSEMBLYIf the ram does not move back and forth smoothly, the strainer tube